Air Conditioning Repair in Newark, OH

For Newark homeowners, those swampy summer scorchers can really put your air conditioning system through the wringer. With highs flirting with the triple digits and that soupy Ohio humidity, your cooling equipment has to run at full tilt just to keep your place comfortable. And all that extra strain can quickly lead to problems if issues aren’t caught early.

At Bassett Services, we always advise keeping a sharp eye peeled for any subtle signs of AC trouble. Catching those red flags promptly can prevent further damage and costly repair bills down the road. When it comes to compressor failures, here are some of the telltale symptoms to watch out for:

Warm Air Blowing

If you’ve noticed the air coming from your vents just ain’t cutting it anymore – weak or warm even when the system is running – that’s a surefire sign something isn’t right with the compressor. It might be struggling to pump refrigerant properly.

Weird Noises

Be on alert for any new or increasingly loud noises like clanking, grinding or high-pitched screeching coming from your outdoor unit. Those abnormal compressor sounds can signal anything from loose parts to full-on component failure about to happen.

Refrigerant Leaks

If you spot any excess moisture or puddles of refrigerant collecting around your outdoor condenser unit, that’s a compressor leak waiting to happen. Don’t run the system if you suspect a leak, as it can quickly lead to even costlier compressor damage.

Electrical Issues

On really scorching days, your compressor has to work extra hard and that puts more strain on the electrical components like the capacitor and contactor relay. If you notice any electrical oddities like the unit frequently cycling on and off, it could be a compressor issue.

Rising Energy Bills

While utility rate hikes can make bills spike, a sudden unexplained jump in energy usage is often due to an aging, inefficient compressor that has to labor overtime to keep up. Those higher cooling costs add up fast.

At the first whiff of any of these issues, it’s wise to get one of our Bassett techs out for an inspection ASAP before that compressor kicks the bucket entirely. We’ll diagnose the problem and make the repair to avoid getting stuck in a sweatbox during peak Newark summer conditions. An ounce of prevention is worth a pound of cure!

We’ve all been there – you’re chilling at home on a swampy Newark summer day when you realize the air blowing out just ain’t as cold and crisp as it should be. You double-check the thermostat and sure enough, it’s set right but your place still feels muggier than normal. What’s the deal?

While there could be any number of potential AC gremlins causing the issue, one of the first things to check is something super basic – your air filter. That humble filter plays a bigger role than most people think in keeping your cooling system humming along properly.

The filter’s main job is to trap all the dust, dander, pet hair and other crummy airborne particles before they can circulate through your home and HVAC system. But when that filter gets overly clogged and nasty, it starts restricting the airflow into the system. And good airflow is absolutely critical for efficient AC operation.

With a dirty filter choking off the air supply, not enough air is able to pass through and absorb heat from the refrigerant coils. Those coils can actually get so starved of airflow that they freeze over with ice buildup. Not only does this block heat absorption, but all that ice puts crazy strain on the compressor as it struggles to keep up.

In worst case scenarios, a severely blocked filter can cause so much airflow restriction and component freezing that your whole AC system basically strangles itself and shuts down completely. You’re stuck sweating like a dog until the unit can defrost properly.

The fix is simple – regularly swap out those filters every 1-3 months, or even more frequently if you’ve got furry friends, or run the AC 24/7 during Newark summers. It’s an easy preventative step to keep airflow unrestricted and your system operating at peak efficiency. Otherwise, you’re just making your AC work overtime for no good reason.

So if your cooling seems subpar and you can’t remember the last filter change, start there first before calling for service. A fresh $10 filter can often restore proper airflow and cooling before any major repair headaches develop. Don’t let a tiny clogged filter turn into an expensive AC emergency!

For Newark homeowners, few things are more frustrating than dealing with a refrigerant leak in your air conditioning system. Not only does it severely impact cooling performance, but those leaks can actually cause permanent compressor damage if left unchecked. Refrigerant ain’t cheap either, so you’re paying to constantly refill the system.

At Bassett Services, we get called out for refrigerant leak repairs all the time, especially during those brutal summer months when ACs are working overtime. But what exactly causes these pesky leaks to develop in the first place? Here are some of the most common culprits:

Formic Acid Corrosion

Believe it or not, the very same refrigerant that helps cool your home can turn corrosive and start eating away at aluminum components and connections over time. This formic acid buildup creates tiny pinhole leaks in coils and lines.

Vibration and Stress

All that shaking, rattling and rolling as your AC cycles on and off repeatedly can loosen up connections and fittings. Components like the compressor get put under a ton of stress, which can lead to cracks and leaks developing.

UV Exposure

For any refrigerant lines or components located outside, constant exposure to the sun’s ultraviolet rays can cause materials to become brittle and crack over years of weathering.

Electrical Arcing

If there are any electrical issues or short circuits in the system, the resulting arcs of electricity can literally burn through refrigerant lines and create leaks.

Old Age

Like anything else, the various rubber seals, gaskets and hoses used in AC systems simply deteriorate as they get older. Once components start drying out and getting brittle, leaks are inevitable.

While some leaks are unavoidable over time, proper professional maintenance can often catch developing issues early before they turn into bigger problems. Techniques like leak-stop sealants can also provide temporary repairs in some cases.

But if you do wind up with a significant refrigerant leak, it’s crucial to have it repaired ASAP by a certified tech. Running an undercharged system puts excessive strain on components and can quickly lead to compressor burnout. Don’t let a simple leak turn into an expensive meltdown!

There few things more annoying than having your air conditioner keep tripping the circuit breaker, especially during one of Newark’s notoriously swampy summer heatwaves. One minute you’re enjoying that crisp, cold air, and the next you’re stuck in a muggy mess after the AC unceremoniously shuts off.

While a circuit breaker trip is basically your electrical system’s way of saying “Hey, something’s not right here!”, figuring out the actual root cause can be tricky. At Bassett Services, we get calls all the time from frustrated homeowners dealing with this very issue. Here are some of the most common reasons why your AC might be frequently forcing that breaker into the off position:

Short Circuit

Whether it’s a frayed or damaged wire, loose connection, or electrical short in the compressor or condenser fan motor itself, short circuits cause a sudden surge in amperage that trips the breaker as a safety measure.

Overloaded Circuit

Older electrical panels may not have dedicated shutoffs for different appliances and circuits. If too many high-draw devices like your AC are running on the same circuit, it can overload and pop the breaker.

Compressor Issues

As the compressor ages and components start wearing out, it has to work harder and draw more amperage to try and do its job. That excess current draw can become too much for the breaker.

Undersized Circuit

If your circuit breaker itself is just too small for the amperage requirements of your AC unit, it’s going to keep tripping constantly when the compressor kicks on due to the load.

Electrical Arcing

When there’s arcing or sparking between electrical components, whether due to a short, loose connection, or failing parts, it creates amperage spikes that can trip breakers.

While the occasional breaker trip might just require a simple reset, frequent issues are a sign of an underlying electrical problem that needs professional diagnosis and repair. Keeping your AC on a dedicated circuit and having it serviced annually can help prevent a lot of these types of electrical gremlins from developing in the first place. Nobody wants to get stuck sweating it out in Newark summer heat!

There’s nothing quite like the sweet sounds of summer in Newark – crickets chirping, birds singing their tunes…and your air conditioner screeching like a banshee. Ah yes, the dreaded high-pitched AC squeal – a noise so eardrum-piercing it’ll have you wondering if you accidentally left the microphone feedback on.

While an AC making unusual noises is never a good sign, that particularly annoying high-frequency squeal often points to a specific set of issues. At Bassett Services, we get calls about this one all the time once temperatures really start climbing. Here are some of the common culprits:

Failing Compressor

The compressor is essentially the heart of your AC system, and when it starts wearing out, it’ll definitely let you know with a high-pitched screech or squeal as it struggles to do its job properly.

Refrigerant Leaks

Refrigerant leaks can cause the compressor to run “dry” without proper lubricating fluid, resulting in loud, high-pitched friction noises as components grind together.

Electrical Issues

If there are any electrical problems like a failing capacitor, the compressor and motors won’t get the proper voltage which can cause them to emit annoying whining or shrieking sounds.

Bearing Wear

Over time, the bearings that allow spinning components like the compressor, fan blades, and motors to turn can wear down and make high-pitched squeaking noises.

Fan Obstructions

When the outdoor fan gets obstructed by dirt, debris, or vegetation, it has to work harder which puts strain on the motor and can produce high-pitched whirring sounds.

So what can you do to stop the screeching? If it’s a minor issue like fan obstruction or low refrigerant, a professional tune-up might be all it takes to get things running smoothly and quietly again. But high-pitched noises often indicate more serious compressor or electrical problems that require repair or replacement.

The bottom line – don’t just try to grit your teeth and ignore that banshee AC wail. Get it checked out promptly before a minor noise issue turns into an expensive system failure during peak Newark summer heat. Your ears (and wallet) will thank you!

There are few things that’ll make a Newark homeowner’s heart sink quite like spotting water dripping from their inside air conditioning unit. You know what that means – a soggy, soaked mess to clean up and potentially costly repairs on the horizon. The joys of homeownership, right?

While a little condensation around the indoor unit is normal, steady dripping or pooling water is definitely cause for concern. At Bassett Services, we get calls about this drippy AC issue all the time once summer temps and humidity levels start ramping up. Here are some of the common reasons why your cooling system might be springing an indoor leak:

Clogged Drain Line

That condensation your AC produces has to go somewhere, which is why there’s a drain line to channel moisture safely outside. But if that line gets clogged with dirt, mold, or other gunk, the water has nowhere to go except out into your home.

Drain Pan Overflow

Most indoor units have a drain pan to catch condensation before it goes down the drain line. If that pan gets cracked, corroded, or the drain line is obstructed, water can start overflowing out of the pan and into your home.

Improper Installation

If the indoor unit itself wasn’t installed perfectly level, it can prevent proper drainage and cause water to pool up inside the housing and eventually start leaking out.

Refrigerant Leaks

Low refrigerant levels can sometimes cause cooling coils to freeze over with ice buildup. When that ice inevitably melts, it can overwhelm the drain system and lead to water overflowing.

Cracked Drain Pan

Over time, those plastic drain pans can develop cracks from debris, deterioration, or even from getting accidentally knocked around during maintenance. Cracked pans can’t properly contain the condensation.

So if you spot a steady drip or puddle coming from your AC unit, don’t just throw a bucket under it and hope for the best. Get it checked out by a professional tech who can inspect the entire system and drain setup to pinpoint and fix the root cause. Otherwise, you’re just asking for a bigger, more expensive water damage headache down the road.