Bassett Watchdog Home Coverage Club

• Burners pulled and cleaned
• Flame sensor pulled and cleaned
• Filter checked/cleaned
• Temperature Rise Verified
• Inspect overall condition of the unit
• Condensate Line / Trap Cleaned
• Blower and Inducer motor amps verified
• Capacitors checked and verified within range
• Thermostat batteries checked/ replaced as needed
• Flue piping inspected
• Full camera inspection of heat exchanger
• Blower pulled and cleaned -if needed and accessible
• Gas pressure(s) verified
• Igniter operation and range verfied
• Heating elements inspected and tested

• Condenser coil chemically cleaned
• Evaporator coil chemically cleaned
• Filters Checked / Cleaned
• Superheat/Subcooling Verified
• Compressor and windings checked and verified in range
• Condenser motor starter checked and verified in range
• Blower motor pulled and cleaned – if needed and accessible
•  All electrical components checked
• Condenser fan motor checked and verified in range
• Temperature Drop verified
• Thermostat operation verified
• Condensate Drain(s) checked / cleared
• Verify refrigerant pressures
• Overall condition of unit – “Inspect overall condition of the unit”

• Clean and Inspect Generator System
• Synthetic Oil and Filter Change
• Air-Cooled OR Liquid Cooled Break-In
• Check All Fluids, Cooling System, and Exhaust System
• Clean out intake and exhaust vents
• Load Test Battery and Check Battery Condition
• Check Fan Belts, Adjust Tension as Needed
• Check or change Spark Plug and Wires, Check Gap
• Inspect and Test Fuel System
• Apply Corrosion Inhibitor
• Clean out generator and battery

• Test all valves for proper operation and leaks
• Verify and inform homeowner of location of main water shutoff
• Checking all drains for leaks – Quite often, there is a leak which over time can cause a lot of damage
• Checking washing machine hoses, as they are a big source of water leaks in the home and should have stainless braided hoses
• Inspecting toilet components and change standard flapper(s) in up to two toilets as needed
• Check for leaks and “perform” a dye test on toilets when requested
• Power flushing of water heater to remove all particulate
• Verify age and condition of water heater
• Inspect garbage disposal for proper operation and leaks
• Whole home water quality test to be completed upon request

• Descale, cleaning and service of all filters
• Perform all manufacturer recommended maintenance

Testing all GFI receptacles and arc fault circuits both inside and outside the home

Testing and inspecting all smoke detectors and batteries

Checking all connections inside the electrical panel ensuring everything is safe and up to code

Making sure the appropriate breakers are present and wiring size and manufacturer match and meet code regulation

Testing main electrical panel outside for safety

Locating main electrical breaker and show homeowner location in case of emergency

Testing and inspection of all switches